BuildR 2 – Wall Sections

Name
The name you give to your wall section.
Has Opening
Does the wall section have an opening. Plain walls do not have an opening so deselect it for that case.
Is Door
Is the wall section used as a door. In BuildR building settings you have the option to cull doors allowing users to access your building.
Vertical Restiction
Will this wall section have a restriction on where it can be generated? It can be kept on the ground floor or on upper floors only.
Opening Model
A model to use as an opening that you have created using the Window/Door creator. Or it can be a custom BuildR Model.
Balcony Model
Use a custom BuildR Model to place something in the lower opening space.
Shutter Model
Define a custom BuildR Model to place either side of the opening.
Dimensions Type
Relative
The specified dimensions are in percentages and recalculated based on the actual wall section size when generated.
Absolute
The specified dimensions are in world units and are not recalculated based on the size of the wall section.
Opening Width
The width of the opening in the wall section in meters
Opening Height
The height of the opening in the wall section in meters
Opening Depth
The depth that the opening sits at from the facade in meters
Opening Width Ratio
The ratio of 0-1 from left to right that the wall section opening is placed
Opening Height Ratio
The ratio of 0-1 from bottom to top of the wall section opening.
Opening is Arched
Is the opening top arched
Arch Height
The height of the arch arc from the start of the arc through to the top
Arch Curve
The percent of curve the arch has, 0 being a straight diagonal from bottom to top. 0.5 creating a pointed arch or ogive shape. 1 will create a perfectly rounded arch.
Arch Segments
The number of segments used to generate the arch. The more segments used, the smoother arcs will appear but will cost more generation time.
Bay Extruded
Will the Wall Section be an extruded bay window with three separate openings adjacent to one another?
Bay Extrusion
The amount in units that the bay window should extrude from the face.
Bay Bevel
The amount the bay window is bevelled into the centre of the Wall Section. This is in normalised space, 0 would generate a box bay window, 1 would bevel all the way to the centre creating a triangular bay shape.
Sill
Will the wall section opening have a sill.
Overshoot
The amount the sill is extruded from the sides of the opening.
Height
The height of the sill in meters
Depth
The amount the sill is extruded from the facade.
Lintel
Does the wall opening have a lintel above it.
Overshoot
The amount the lintel is extruded from the sides of the opening.
Height
The height of the lintel in meters
Depth
The amount the lintel is extruded from the facade.
Opening Frame
Generate a border around the opening using the Sill surface
Size
The thickness of the frame in units
Extrusion
The extrusion of the frame outwards from the face in units
Surfaces
Wall
The Surface used on the walls of the wall section.
Opening
The Surface used on the opening of the wall section
Sill
The Surface used on the sill floor of the wall section
Ceiling
The Surface used on the ceiling of the wall section opening

Comments are closed.